

Mercury Maverick 1050VA UPS
KSh 13,000.00
Mercury Maverick 1050 UPS Offline 1050VA/630W 2X Universal Socket 9AH Battery UK Power Cord
Features
Automatic restart of loads after UPS shutdown – Automatically starts up the connected equipment upon the return of utility power. Automatic self-test – Periodic battery self-test ensures early detection of a battery that needs to be replaced. Automatic Voltage Regulation (AVR) – Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Resettable circuit breaker – Easy recovery from overloads; no need to replace a fuse.
Mercury is a long-known, widely used UPS brand and the new Maverick model features its latest improvements, designed to serve users’ best power backup demands.
Get an 1050VA top performance UPS in the Mercury Maverick 1050VA UPS. The advanced design Mercury Maverick UPS model is here and those who want top performance have a product worth their money and trust. Make your order today of the Mercury Maverick 850VA UPS and have it delivered to at your doorstep within 24 hours if you are outside Nairobi. If you are within the Nairobi Metropolitan area, it can be delivered to you within 2 hours of your order. Call office line on 0111 040 400 or shop online by adding it to cart and checkout.
Model:
– Capacity: 1050VA/630W
Input :
– Voltage 220-240VAC
– Voltage Range 140-300 VAC
– Frequency: 50 / 60Hz
– Current :4.8A Max
Output:
– Voltage Regulation (Bat.Mode): +/-10%
– Frequency :50 / 60Hz
– Waveform: Simulated Sine wave
Battery:
– Battery Type: 12V / 9AH x 1
– Charging ability: 6 hours recover to 90% capacity
Transfer Time:
– Typical:2-6ms
Protection : Short circuit, Overload, Battery discharge and overcharge, Surge Protection
Indications:
– Line Mode: Green lighting
– Battery Mode :Yellow flashing
– Fault: Red Lighting
Audible Alarm:
– Battery Mode: Sounding every 10 sec
– Battery low :Sounding every 1 sec
– Overload : Sounding every 0.5 sec
– Fault: Continuous sounding
Environment:
– Humidity 0-90% relative Humidity 0-40°C (Non-condensing)
– Noise Level : Less than 40dB
– Dimension: 283mm x 101mm x 140mm
Related products
APC 650VA, EASY UPS, AVR, 230V
PRODUCT OVERVIEW
Max Configurable Power (Watts): 325 Watts / 650VA Output Frequency (sync to mains): 50/60 Hz +/- 1 Hz Sync to mains Topology Line: interactive Waveform type: Stepped approximation to a sinewave Transfer Time : 4 ms typical 6 ms maximum Input frequency: 50/60 Hz +/- 3 Hz Auto-sensing Input voltage range for main operations : 180 - 270V Number of Power Cords : 1 Type of Input Protection Required GL : fuse Input Power Factor at Full Load : 0.5APC EASY UPS BV 800VA, AVR, Universal Outlet, 230V
PRODUCT OVERVIEW
- Max Configurable Power (Watts): 450 Watts / 800VA
- Output Frequency (sync to mains): 50/60 Hz +/- 1 Hz Unsynchronised
- Input frequency: 50/60 Hz +/- 5 Hz Auto-sensing
- Battery type: Lead-acid battery
- Expected Battery Life (years): 3 – 5
- Control panel: LED Status display with on line : on battery
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
APC Easy UPS BVX 2200VA, 230V, AVR, IEC Sockets BVX2200LI
APC Smart-UPS C, Line Interactive, 1000VA, Tower, 230V, 8x IEC C13 outlets, SmartConnect port, USB and Serial communication, AVR, Graphic LCD
APC Smart-UPS C, Line Interactive, 1500VA, Rackmount 2U, 230V, 4x IEC C13 outlets, SmartConnect port, USB and Serial communication, AVR, Graphic LCD
SPECIFICATIONS
- Cold-start capable - Provides temporary battery power when the utility power is out.
- Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency - Reduces utility costs, generates less heat.
- LCD Status Display - Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Pure sine wave output on battery - Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- SmartConnect - Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
- Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
APC Smart-UPS On-Line, 10kVA/10kW, Rackmount 6U, 230V/400V, 6x C13+4x C19 IEC outlets, Network Card+SmartSlot, Extended runtime, W/ rail kit
TECHNICAL DECSRIPTION
Output power capacity: 10.0kWatts / 10.0kVA Rack Height :6U Output Connections : (1) Hard Wire 3-wire (H N + G) (Battery Backup) (6) IEC 320 C13 (Battery Backup) (3) IEC Jumpers (Battery Backup) (4) IEC 60320 C19 (Battery Backup) (1) Hard wire 3-wire (H N + E) (Battery Backup) (6) IEC 60320 C13 (Battery Backup) (4) IEC 320 C19 (Battery Backup) Nominal Output Voltage: 230V Nominal Input Voltage: 230V, 400V 3PH Input Connections: Hard wire 3-wire (1P + N + E), Hard wire 5-wire (3P + N + E)MECER 850-VA(480W) Line Interactive UPS with AVR, Built-in Surge Protection, without Software (Optional USB Port) 1 x12V 9Ah battery
HIGHLIGHTS
- 850VA line Interactive UPS
- Cold start function
- Off-mode charging
- Simulated sine wave output
- Auto restart while AC is recovering
- Boost and buck AVR for voltage stabilization
- Excellent microprocessor control guarantees high reliability
- Built-in super smart charger, shorten 50% of charging time
- Offering LED and LCD panels for selection
- Optional USB/RS-232 communication port and RJ-11/RJ-45 protection
Reviews
There are no reviews yet.